Aim MXS Datalogging Dash with GPS

Currently out of stock, contact us for details

£1,980.00
Price incl. VAT

AiM MXS Datalogging Digital Dash, please see bottom of advert for note on this sale.



MXS is the new AiM dashlogger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. 
Performance and data acquired can also be incremented adding up to eight expansion modules via the inbuilt dedicated Aim CAN bus connection.
Its 5" display has been specifically designed for small cockpits installation.

 

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. The MXS has 3 CAN connections in total, one dedicated to Aim's proprietary CAN connection for use with expansion modules, and 2 for connection to external CAN bus networks. The software includes predefined configurations for many OE and aftermarket CAN streams, and these are being constantly updated by Aim.

 

A high contrast TFT display identifies MXS at the first glance. 

An ambient light sensor keeps the backlight at optimum brightness levels.

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.

Swapping between pages can be managed pushing one or two pushbuttons.

 

MXS features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. 

Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.

Choose from a host of advanced multicoloured RGB shift light patterns that can be customized to your liking, and for each unique gear when required.

 

MXS features two digital outputs

The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs. 
They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

 

 

 

Using the built-in CAN bus, you can add expansion modules to the MXS to increment the performance and the data acquired:

 

GPS08 Module

Thanks to GPS08 Module (included in the kit) and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique.

 

Channel Expansion

It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

 

TC Hub

It adds 4 K thermocouples.

 

LCU-One Lambda Controller

Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.

 

SmartyCam HD cameras

The on-board cameras that overlays on videos the data sampled by your logger.

 

Memory Module

The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests.

 

 

The Race Studio 3 software is the heart of your MXS, managing all your activities related to:

Configuration

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

 

Analysis

With Race Studio 3 you can also analyse all data recorded by MXS and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

 

Connect, configure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.


Click here to download the instruction manual

Click here to download the Race Studio 3 configuration software



Please Note; If you add this item to your basket and do not inform us otherwise, we will send you out the version that has a flat mount GPS sensor with a 4m long cable. Also available with shorter cable lengths and with a GPS sensor designed to mount on the otherside of a panel with it's cable going through a hole in the panel, for installation on the roof of a saloon car etc after the drilling of a hole / use of OE aerial hole.