AN-6 Forged aluminium 90 degree to 8mm barb fitting

RnD 1000's  - Based on a Bosch Injector adapted to fit the Z28 / A28 Vectra and Insignia VxR engine

We have found these injectors to be a very good performance injector, suitable upto around the 900HP region when run at a sensible base fuel pressure.  

We have also found that for a large injector these respond very well at small pluse widths, generally idle can be mapped to be stoich without any issues of AFR stability.

They feature a multi hole orifice plate in the end that sprays a very efficiant cloud of fuel rather than a singular jet, this helps you to burn more of the fuel that you inject, giving you less smoke at righer mixtures and more efficiency.

These are a direct fit with regards physical install, but will require a plug change on your injector loom to the Bosch Jetronic / powertimer connector. Those are available here separately. Care is needed to make sure they are installed and seated suitably.

Flow and dead time data for your tuner is included in the pictures above. They come as a flow matched set.