Laser cut and folded aluminium bracket for the AEM 1 gallon tank and high pressure pump

Custom made to allow easy install of the AEM water methanol injection system into the rear end of a Vauxhall Astra rear seat – this bracket will also fit many other cars too if you are wanting to install the same meth kit to your car however we can not confirm for every type of car.

A common issue when installing the kit is where do you fit it ? Lots of the newer cars do not feature so many flat places that you have good access to install such a kit. A bracket system is the best way.

After installing a few of them you soon get to mounting the whole kit onto a base plate being the best idea , and this is what we did !

Save yourself some hassle and use this bracket. By fitting the tank more upright on the back of the rear seat it is far more easy to complete every task you need to do and makes the install much smarter all round.

CNC machined and fully anodised aluminium, a simple item but made to a high standard.

Sometimes the OE oil level sensor is not required on the Z20 engine. This little bung slips in place and uses the same clip that you find in the stock bottom end gasket kits.

Comes supplied with orange O ring ready to fit

Billet Steel Cylinder head hollow dowel pair - 

Replace the junky standard ones for some of these , proven to not crush down and allow the head to move so much 

Wössner Z20 turbo Forged Pistons

Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life.

Wössner pistons feature a unique Moly coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston.

This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances.

The crowns of the pistons are also mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns. Price includes all piston rings and gudgeon pins.

Spec;

Engine type Z20LET / Z20LEH

OE Bore size 86mm

Bore sizes available 86mm / 86.5mm / 87mm

Engine CC 1998.23cc / 2021.53cc / 2044.97cc

Stroke 86

Wössner Comp. ratio 8.8:1

OE Comp. ratio 8.8:1

Comp. height 30.43

Valve per Cylinder 4

Cylinders 4

Reccomended Piston to Bore clearance 0.08

Available in 86, 86.5 and 87mm diameters.

Wössner Z20 turbo Forged Pistons

Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life.

Wössner pistons feature a unique Moly coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston.

This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances.

The crowns of the pistons are also mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns. Price includes all piston rings and gudgeon pins.

Spec;

Engine type Z20LET / Z20LEH

OE Bore size 86mm

Bore sizes available 86mm / 86.5mm / 87mm

Engine CC 1998.23cc / 2021.53cc / 2044.97cc

Stroke 86

Wössner Comp. ratio 8.8:1

OE Comp. ratio 8.8:1

Comp. height 30.43

Valve per Cylinder 4

Cylinders 4

Reccomended Piston to Bore clearance 0.08

Available in 86, 86.5 and 87mm diameters.

Wössner Z20 turbo Forged Pistons

Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life.

Wössner pistons feature a unique Moly coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston.

This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances.

The crowns of the pistons are also mirror polished to better resist detonation on a high performance engine. Mirror polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns. Price includes all piston rings and gudgeon pins.

Spec;

Engine type Z20LET / Z20LEH

OE Bore size 86mm

Bore sizes available 86mm / 86.5mm / 87mm

Engine CC 1998.23cc / 2021.53cc / 2044.97cc

Stroke 86

Wössner Comp. ratio 8.8:1

OE Comp. ratio 8.8:1

Comp. height 30.43

Valve per Cylinder 4

Cylinders 4

Reccomended Piston to Bore clearance 0.08

Available in 86, 86.5 and 87mm diameters.

Z20 oil pump fitting collar

Tired of using a screwdriver to poke the seal over the crank when fitting an oil pump to the Z20 engine ?

Do it the proper way with this fitting collar – this fits over the crank end perfectly and has a taper to the outside , allowing you to line up the flats and then just slide the oil pump onto the block , the professional way

if you have ever managed to damage a seal when building one of these you know that by the time you have stripped it back down to fit a new pump seal , this thing would have already paid for itself 3 times over .

If you build a few Z20s then this is for you , if you want to build one but carefully then hopefully we have made the price accessible.