M16 x 2mm Pitch MALE RH Rod End Bearing with lock nut

    
M16 Precision Spherical Rod End with locknut

Standard pitch of 2.00mm with right hand thread

XMRM16x2 80KN rating with a 14 degree misalignment from its centre point, a total of 28 degrees in total. 

Designed and tested for high load automotive applications, we use these on our race prepared cars. These are perfect for hard motorsport use.

Over the years we have struggled to find spherical rod ends of decent quality. Constantly being let down by inferior 3 piece type lined rod ends, we have finally found the one that gives most in all areas.

Fully machined forged body ensures maximum strength for size. Perfectly ground hard chrome ball, as a bearing should be.

Full composite PTFE high shock loading liner, rated to 80KN in the 16mm size, these are almost twice as strong as the M12 version we stock 

Maintenance free - no more searching for grease nipples!

Supplied with a lock nut so you don't have to buy a pack of ten when you need only one, a one stop solution to bearings.

We also offer dust boots for these rod ends, and they are available individually if that's all you need.

Professional installation is recommended, as is periodic inspection.

Please contact us if you have any questions, we are always happy to help.

This listing is for 1 Spherical bearing Rod End with locknut.