RnD 1000cc Injectors – Z16 Set of 4

RnD 1000's  - Based on a Bosch Injector adapted to fit the Z16 / A16 Corsa VxR engine

We have found these injectors to be a very good performance injector, suitable for around the 600HP region when run at a sensible base fuel pressure.  

We have also found that for a large injector these respond very well at small pluse widths, generally idle can be mapped to be stoich without any issues of AFR stability.

They feature a multi hole orifice plate in the end that sprays a very efficiant cloud of fuel rather than a singular jet, this helps you to burn more of the fuel that you inject, giving you less smoke at righer mixtures and more efficiency.

These are a direct fit with regards to electrical connectivity and install, care is needed to make sure they are installed and seated suitably. You will need to rotate the electrical connector to about 90 degrees to clear the cylinder head, but this requires no wiring modification. Basically point them all sideways when fitting, this will make more sense when you come to do it if it doesn't now!

Flow and dead time data for your tuner is included in the pictures above. They come as a flow matched set.